LMS Fire Damper Positive Pressure Air Supply Outlet Production Line is mainly composed of electric decoiler, leveling – punching – cutting machine, conveyor, roll forming machine, hydraulic bending system, hydraulic system and PLC control system, widely used for the mass production of fire damper positive pressure air supply outlet. It is one of the important production line equipment for fire damper manufacture, with the advantage of high efficiency and precision, and stable performance.
Decoiling → Material Guiding → Leveling → Big Edge Punching → Small Edge Punching → Installing Hole Punching (∅ 16 mm) → Panel Hole Punching → Cutting To Length → Conveying → Roll Forming → Hydraulic Automatic Bending → Manual Discharging.
| Item | Quantity |
| 5T Electric Decoiler | 1 Unit |
| Leveling – Punching – Cutting Machine | 1 Unit |
| Conveyor | 1 Unit |
| Roll Forming Machine | 1 Unit |
| Hydraulic Bending System | 1 Set |
| Hydraulic System | 2 Sets |
| PLC Control System | 1 Set |
| Item | Parameters |
| Material | Galvanized Plate |
| Material Thickness | 1.5 – 2.0 MM |
| Width of Coil | 250 MM |
| Weight of Coil | ≤ 5000 KGS |
| Forming Speed | 1 – 15 M/Min, Adjustable |
| Plate Length Error | ± 0.3 MM / 1000 MM |
| Punching Hole Distance Error | ± 0.3 MM / 1000 MM |
| Bending Error of Frame | ± 1.0 MM / 1000 MM |
| Processing Mode | Decoiling / Single Piece / Mouth Type / L Type / U Type |
| Control Mode | PLC Control |
| Main Power Supply | 380 V, 50 HZ, 3 Phase |
| Hydraulic System Pressure | 25 MPa, Working Pressure: 8 – 12 MPa |
| External Dimensions of Line | Approx. 12000 × 1000 × 1200 MM (L × W × H) |
| Total Power of Line | Approx. 16 KW |
