LMS R-Panel Roof Tile Roll Forming Machine mainly consists of decoiler, manual shear, roll forming machine, cut-off device, hydraulic pump station and electronic control panel, widely used for roof panel mass production in customized specification and design, with the advantage of easy operation, high efficiency and precision, and stable performance.
Material → Decoiling → Roll Forming → Cutting Off → Profile.
| NO. | Item | Quantity |
| 1 | Decoiler | 1 Unit |
| 2 | Manual Shear | 1 Set |
| 3 | Roll Forming Machine | 1 Set |
| 4 | Cut-Off Device | 1 Set |
| 5 | Hydraulic Pump Station | 1 Set |
| 6 | Electronic Control Panel | 1 Unit |
1. Material: Pre-painted Color Steel Sheet
2. Material Width: 1000 MM
3. Material Thickness: 0.5 – 0.7 MM
| NO. | Item | Parameter |
| 1 | Forming Machine Power | 7.5 KW |
| 2 | Oil Pump Power | 3.7 KW |
| 3 | Oil Pump Pressure | 10 Mpa |
| 4 | Diameter of Axis | Ø 72 |
| 5 | Quantity of Rollers | 16 Groups |
| 6 | Decoiler Width | 1000 MM |
| 7 | Decoiler Bearing | 5000 KGS |
| 8 | Total Power | 15 KW |
| 9 | Power Supplier | 3 Phase 4 Lines AC 480V 60HZ |
