LMS Closed Cross Beam Roll Forming Machine mainly consists of decoiler, roll forming machine, cut-off device, electric control panel, electric welding machine, straightening device and run-out table. Widely used for closed cross beam production in customized dimension and design, LMS Closed Cross Beam Making Machine has the advantage of high production efficiency and accuracy, and stable performance.
Material → Roll Forming → Straightening → Cutting-Off & Set Length → Final Product.
| NO. | Item | Quantity |
| 1 | Decoiler | 1 Set |
| 2 | Roll Forming Machine | 1 Set |
| 3 | Cut-Off Device | 1 Set |
| 4 | Electric Control Panel | 1 Set |
| 5 | Electric Welding Device | 1 Set |
| 6 | Straightening Device | 1 Set |
| 7 | Run-Out Table | 1 Set |
Closed Beam Roll Forming Machine Main Technical Parameters:
| NO. | Item | Parameters |
| 1 | Material | Galvanized Sheet |
| 2 | Material Thickness | 1.5 MM |
| 3 | Material Width | 295 MM (For Profile Size 98 × 50) |
| 4 | Groups Of Roller | 24 Groups |
| 5 | Roll Forming Speed | 10 M/Min |
| 6 | Power Supply | 3 Phase 4 Lines AC 380V 50HZ |
