LMS Cross Brace Roll Forming Machine

LMS Cross Brace Roll Forming Machine

LMS Cross Brace Roll Forming Machine mainly consists of decoiler, roll forming machine, cut-off device, electrical control system and run-out table. Widely used for cross brace production in customized dimension and design, LMS Bracing Roll Forming Machine has the advantage of high production efficiency and accuracy, and stable performance.

Cross Bracing Machine Production Flow:

Material Coil → Decoiling → Roll Forming → Hydraulic Cutting-Off (With Holes) → Finished Bracing.

Bracing Making Machine Main Composition:

NO.	Item	Quantity
1	Decoiler	1 Set
2	Roll Forming Machine	1 Set
3	Cut-Off Device	1 Set
4	Electronic Control System	1 Unit
5	Run-Out Table	1 Set

Cross Bracing Roll Forming Machine Main Technical Parameters:

1. Material: G.I. Coil / CR Coil

2. Material Thickness: 1.2 – 1.6 – 2.0 MM

3. Profile Specification: Same As Drawing

4. Roll Forming Speed: 6 – 15 Meters / Minute

5. Power Supply: Customized

12891, 12891, LMS Roll Forming Machine Catalogues, LMS-Roll-Forming-Machine-Catalogues.pdf, 20183933, https://test1.tzg.ink/wp-content/uploads/2019/05/LMS-Roll-Forming-Machine-Catalogues.pdf, https://test1.tzg.ink/product/lms-steel-ridge-cap-roof-roll-forming-machine/lms-roll-forming-machine-catalogues/, , 3, , , lms-roll-forming-machine-catalogues, inherit, 8491, 2024-03-26 06:29:59, 2024-03-26 06:29:59, 0, application/pdf, application, pdf, https://test1.tzg.ink/wp-includes/images/media/document.png